New

SR751 Smart RF (Radio Frequency) Repeater Module

Availability: In stock

$37.99

Description

Details

What is the SR751 Smart RF Repeater?
The SR751 Repeater repeats X10 RF (Radio Frequency) signals. This is especially useful if you are trying to cover a larger area with any sort of X10 RF signal. Things like remotes, alarm systems and motions sensors really benefit from the RF Repeater. The unit also has an electrical pass-through at the bottom of the module so you don't even have to lose that outlet!

NOTE: The SR751 repeats RF Signals operating at the 310 MHz (X10 Automation) and 433 MHz (X10 Security) frequency.

 

How It Works

 

What are the advantages of using the SR751 Smart RF Repeater?
The SR751 comes with the following benefits:

  • Can greatly extend the range of the X10 Security Devices (Door/Window Sensors, Motion Sensors, etc) with proper placement
  • Extends the range of X10 Hand Remotes like the HR12a and KR19A
  • Has a Passthrough so you dont use up an outlet
  • 2 Year Manufacturers Warranty

What other products work with the SR751 Smart RF Repeater?
Any X10 unit that operates via RF Frequency can benefit from the Smart Repeater. This can be any Wireless Controller or X10 Wireless Security Component.

 

CONTROLLERS XPSS                
X10 Controllers
X10 Security


Additional Testing Instructions

 

TESTING THE SMART REPEATER WITH AN X10 SECURITY CONSOLE AND X10 LAMP MODULE

  1. Set the HOUSE CODE on an X10 Lamp Module to “M” and the UNIT CODE to “1”.
2. Turn the dial on the SR751 to the 'T' position. Press the TEST button on the Smart Repeater. The Lamp Module should turn on and off for each successive press.
3. If there is no response, try moving the SR751 closer to the Lamp Module and trying again.

 

TESTING THE SMART REPEATER WITH AN X10 AUTOMATION TRANSCEIVER

  1. Set the HOUSE CODE on any X10 Transceiver to “M”.
2. Turn the dial on the SR751 to the 'T' position. Press the TEST button on the Smart Repeater. The transceiver clicks on and off for each successive press.
3. If there is no response, try moving the SR751 closer to the transceiver and trying again.

 

TESTING THE SMART REPEATER WITH AN X10 SECURITY CONSOLE ONLY

  1. Mark the furthest distance from the console that you can ARM/DISARM from your security remote prior to installing the SR751 Smart Repeater.
2. Once the SR751 is installed check to see if the furthest distance from which you can ARM/DISARM the console has changed.
3. If there is no response, try moving the SR751 closer to the console and trying again.


Specifications

Specifications
X10 Product No.: SR751
Whats Included: (1) X10 Smart RF Repeater (SR751)
(1) Install Instructions
Compatibility X10 RF compatible
Compatible Load Type: Outlet Passthrough
Power Rating:  120VAC/60Hz
Downloads:
Product Manual

 

Additional Testing Instructions

 

TESTING THE SMART REPEATER WITH AN X10 SECURITY CONSOLE AND X10 LAMP MODULE

  1. Set the HOUSE CODE on an X10 Lamp Module to “M” and the UNIT CODE to “1”.
2. Turn the dial on the SR751 to the 'T' position. Press the TEST button on the Smart Repeater. The Lamp Module should turn on and off for each successive press.
3. If there is no response, try moving the SR751 closer to the Lamp Module and trying again.

 

TESTING THE SMART REPEATER WITH AN X10 AUTOMATION TRANSCEIVER

  1. Set the HOUSE CODE on any X10 Transceiver to “M”.
2. Turn the dial on the SR751 to the 'T' position. Press the TEST button on the Smart Repeater. The transceiver clicks on and off for each successive press.
3. If there is no response, try moving the SR751 closer to the transceiver and trying again.

 

TESTING THE SMART REPEATER WITH AN X10 SECURITY CONSOLE ONLY

  1. Mark the furthest distance from the console that you can ARM/DISARM from your security remote prior to installing the SR751 Smart Repeater.
2. Once the SR751 is installed check to see if the furthest distance from which you can ARM/DISARM the console has changed.
3. If there is no response, try moving the SR751 closer to the console and trying again.


Downloads

You may also be interested in the following product(s)