What is the XPS4 Wall Switch?
The XPS4 is the NEW VERSION of the XPS3! It has been updated and upgraded! Use this relay switch for any sort of appliances, fans, or lighting. Works great with the newer alternative lighting (incandescent, halogen, LED, etc). This is a 20 Amp switch and it can handle most 120v appliances. It does require a neutral wire.
This switch is built with a new, more reliable relay. It is also almost silent! The older XPS3 switch had a very audible noise when turning on and off, no longer! The switch also has AGC (automatic gain control). What this means for you is a more reliable X10 experience as the AGC will weed out some of the line noise directly surrounding the switch.
This switch also houses our Night Light feature. This makes the switch ultra easy to find at night and gives the switch a very classy look! We have made sure to not make it too bright, just a simple glow that will assist you in locating the light during the darkest of nights.
Upgrade to the XPS4 and enjoy these added benefits!
What are the advantages of using the XPS4 Wall Switch?
The XPS4 comes with the following benefits:
- Home Automation Capabilities and Timed Events
- Allow Remote functioning of lights and appliances with any X10 Controller
- 20 Amp relay switch for heavy duty 120v appliances like pool pumps and AC units.
- AGC Automatic Gain Control to help control line noise
- Near Silent Relay action keeps your switch quiet
- Night Light LED for locating your switch when it's dark
- 2 Year Manufacturer's Warranty
What other products work with the XPS4 Wall Switch?
If you are looking to replace a switch that is in a 3-Way configuration (two switches operate the same light), use the XPSS Secondary Switch at the site of your current secondary switch. If you want to control this switch remotely, check out our X10 Controller Section.
X10 Product No.: XPS4
What's Included: (1) X-10 20-Amp Relay Decorator Wall Switch XPS4, (1) Set Interchangeable White/Ivory Paddle Switch Covers
Compatibility: 20-amp devices at 120V, control up to 1,800 watts
Connection Requirement: Neutral Wire
Downloads: Product Manual
Note: For single-pole applications, leave the "control" terminal unconnected.
Because these switches respond to ALL LIGHTS ON, use care when controlling non-lamp loads. Use an X10 appliance module or wall receptacle if you don't want your device to respond to that command.