A longtime X10 Home Automation favorite the Keychain Remote (KR19A) is being offered up to you at a fraction of the normal price for a limited time. Grab this 4-pack for 15% off right now. Something every X10 Home Automater learns early is you can never have enough controllers lying around. One for him, her, the kids, visiting relatives, babysitter... there is ALWAYS a reason to have more X10 Keychain Remotes!
X10's keychain remotes have long been a favorite for control and convenience. The SlimFire Keychain Remote turns on and off two lamps or appliances and brightens and dims lights connected to any X10 Lamp Module or Wall Switch Module.
This tiny Keychain Remote control has 4 buttons that controls X10 addresses 1 and 2 or 5 and 6 on any of the 16 house codes. The bottom 2 buttons control the dim and bright of the last unit turned on.
Tiny, functional & so easy to program!
To change the Housecode, simply hold down the (top) ON button for 3 seconds. After the LED light flashes, press and release the (top) ON button the appropriate number of times for the Housecode you want to set. Once for A, twice for B, etc. The LED blinks for each press.
To change the unit code: Press and hold the (top) OFF button for 3 seconds. The red LED blinks back the current code. Press and release the top OFF button the appropriate number of times for the Unit Code you want. 1 time for Unit Code 1, 2 times for 2, 16 times for 16. The bottom button (lower) will automatically become 1 unit code higher than the top. (For example, if the top button is A5, then the bottom button will be A6)
This device requires an RF receiver to transmit X10 signals wirelessly to other X10 control modules.
|X10 Product No.:||KR19A|
|Whats Included:||(1) X10 Keychain Remote Control|
|Power Supply:||3V lithium battery (included)|
|X10 Control:||Dim Lights, On/Off, All On/Off Capable|
|Dimensions:||1.5" wide, 2.2" long, and .5" thick|
Note: This device requires an RF receiver to transmit X10 signals wirelessly to other X10 control modules