|
X10 FREQUENTLY ASKED QUESTIONS (FAQ) Why doesn't my Wireless Wall Switch work in every bank-switch position with my RR501 (R.S. 61-2676R) Transceiver Module? Wireless Wall Switches are normally packaged with the TM751 which passes through all codes from the wireless wall switches onto the power line to control X10 modules. You can also use the Wireless Wall Switches with any X10 or Plug 'n Power security system instead of the TM751 (the security system receives the RF signals from the wireless wall switches and passes them onto the AC power line to control the X10 module). You can use the Wireless Wall Switches with the RR501 but there are some caveats: The 2 button version, RW684 (61-2562 CMC) will only work on position 1-2 with the RR501 set to 1-8, or position 9-10 with the RR501 set to 9-16. It will not work with the RW684 set to 5-6 or 13-14. The 4 button version, RW694 (61-2664) will only work on position 1-4 with the RR501 set to 1-8, or position 9-12 with the RR501 set to 9-16. It will not work with the RW694 set to 5-8 or 13-16. The 3 button version, RW724 (61-2563 CMC) will only work on position 1-3 with the RR501 set to 1-8, or position 9-11 with the RR501 set to 9-16. It will not work with the RW724 set to 5-7 or 13-15. |
