VCR COMMANDER KIT! RECORD ONLY THE ACTION!!! .
	Hands FREE way to record ONLY the moments you want whether you’re home or not! X10.com Price: $49.99 (Does not include camera or transceiver module) Bonus: FREE EagleEye Motion Sensor! No Risk: 30-Day money back guarantee Live Chat Note: Also SEE the NEW VCR Commander II
"This takes surveillance to the next level!!"	What's included

Now you can set your XCam2 and VCR on auto-pilot to "Record ONLY the action" in and around your home totally hands free! It's the NEW X10 VCR Commander Kit. Whether you're home or not, when motion is detected, this amazing product can turn on the appropriate X10 Camera and your VCR - then automatically send a "Record" command to your VCR!

VCR Commander also works with multiple camera systems (system expandable to 16+ cameras). If a person starts walking around your house, as they enter Zone 1 the camera monitoring Zone 1 will turn on, and the VCR Commander starts your VCR recording. As they enter Zone 2, the second camera will turn on (camera 1 will turn off) and the VCR will continue to record what's happening in Zone 2. As the person completes a trip around your home (ex. visiting Zones 1-4), the tape will show everything as they move between all four zones. EXTREMELY SMART! NOTE: Requires 1 motion sensor per camera (1 EagleEye Motion Sensor included in VCR Commander Kit).

When no motion has been detected from the motion detector linked to the VCR Commander for 5 minutes - the VCR Commander will turn the VCR OFF or STOP recording. This will make sure your tape only shows the action and reduces the amount of blank, no action time. GENIUS!

Record ONLY the Action: Imagine going on a 2 week vacation with the family. When you get home, turn on the VCR and watch everything the happened around your home while you were away. Someone try to visit you? Someone try to break in? Who smashed the mailbox? It's all on tape! THE EVIDENCE IS ALL YOURS!

Another Great Way to use the VCR Commander: Record a video for your spouse or kids. As soon as they walk in the door, the TV and VCR automatically turn on. Then the VCR automatically runs the "play" command. Your video message is delivered with perfect timing. Record directions or chores for their kids when they get home from school. Record a romantic message for your spouse. Great fun and very practical! AMAZING!

How it works & directions for setup The new VCR Record function uses a learning function similar to that on X10's Learning Remote (UR24A) to learn a sequence of up to 3 different IR commands (labeled PWR, REC and PLAY) to start the VCR recording. It also takes an X10 address programmed into it. You teach the IR commands by selecting the button on the VCR Commander (UX21A) to learn for and then using the VCR remote control to emit that command to the IR receptor on the VCR Commander. The order that these commands are learned also determines the order in which they will be issued. You have to hold the VCR remote no more than 3 inches away from the UX21A to get this to work correctly. The IR emitter cable must be disconnected from the VCR Commander for any programming to work.

When the On command from the programmed X10 address is received, the VCR Commander will issue the programmed IR sequence to the VCR through the IR emitter cable. More On commands (signals of further motion) within 5 minutes will be ignored. If no more On commands are seen within 5 minutes (no further motion), the VCR Commander will issue the IR “Stop” command. After the “Stop” command is issued an On command will start the cycle over again. Because of this, it is recommended that you shouldn’t use the “PWR” command as part of their record sequence, and should instead leave their VCR on all the time.

Note: In a multi-camera scenario, one motion detector would be used to turn on/off the VCR Commander, while the other motion sensors would turn on/off the cameras. If no motion is detected after 5 minutes from the motion detector controlling the VCR Commander then the VCR will stop recording.

Parts of the kit without camera: (This kit was designed for someone that already owns an XCam2 camera and transceiver module. If you do not own an XCam2 Camera yet, please see below for order options)

• VCR Commander Base
• IR Emitter cable with 3 emitters
• Power Adapter
• Eagle Eye Motion Detector - FREE

What's included

VCR Commander with FREE EagleEye Motion Sensor: $49.99