Live
Video Preview: This window will always show the current camera that is
"on." Click the image, and it will display an enlarged re-sizable window
of that camera in LIVE video!
Set Delay Between
Cameras: MultiView allows you to customize how frequently to change to another
camera. Min: 4 seconds. Max: 999 minutes. Ex. If you set it to 4 seconds, than Camera
One's image will be updated every 16 seconds (if you have 4 cameras).
Launch FireCracker: Need
to turn on/off lights in various rooms that you're monitoring. FireCracker allows you to
send House/Unit codes via your PC, so you can control any light or appliance!
Motion Detected - You
Have Pics!: If you set MultiView to "Save Photos Only when motion is
detected" (See Settings) - then this
button will appear once images are saved. This serves as a notification feature so if you
get home from work you can quickly view what happened while you were gone.
Sleep until Motion
Detected: As a user you can toggle the software between LIVE mode so it cycles
between cameras at the set interval rate or you can put it in "sleep mode".
Then, combined with motion sensors (very easy to configure, see Settings) you can
Multi-View wake-up and start recording images for later preview once motion is detected.
Zoom Snapshots: By
clicking this button MultiView will launch a large resizable "full screen" view
of all your cameras. See below. |
MultiView V1.0 Upgrade Kit! - $99.99 + FREE Motion Detection
Kit. SAVE $55!
X10 Gets Top Ratings - Click Here to Read Our Reviews!
If you prefer to order by phone or need help finding the X10 product that's best for you, please call us between 5am-11pm PST/8am-2am EST Mon-Fri, 7am-9pm PST/10am-12am EST Sat-Sun.