|
|
| CONTACT X10 800-675-3044 |
|
Now you can have your lights turn on when you enter the room. Magic? No, it's the new Motion Sensor (MS12A) working with any X10 Wireless Transceiver (including ActiveHome) or X10 security system to provide you the comfort of never tripping into a dark room again. The MS12A sends wireless Radio Frequency (RF) signals to an X10 Transceiver or any X10 security system base receiver. The Transceiver receives the signals from the Motion Sensor and passes them onto your house wiring. These signals are then received by X10 lamp, appliance, or wall switch modules to control lights (or appliances) around the home. I The signals transmitted onto your house wiring can also be received by the CM11A two-way Computer Interface (included with ActiveHome) to initiate macros. The CM11A then performs a sequence of events that you've set it up to do. Normally the MS12A will turn on an X10 module set to its code, however when used with the CM11A 2-way Computer Interface (ActiveHome) the MS12A becomes much more powerful. Instead of turning on a module set to A1, you can set A1 to initiate a macro that performs a sequence of events. For example you enter the room, the table lamp can turn on and dim to 70%, and the stereo can turn off 30 minutes later. Built in photocell works like a watchful eye and will turn lights on and off at dusk and sunrise. This will save you energy as it only detects motion in the dark. Features: Up to 20' ft range. Motion Sensor is 2.5 x 2.5 inches. (it's small so you can place them almost anywhere!)
|
. Order Online or Call Toll Free Open 24/7 1-800-675-3044 |
| Home Page ..|. Products | .X10 Community .|..View Cart..| Product Catalog . Customer Support .|.. About X10.|. What's New |
| . ...... ...... *Prices and Special Free Shipping for orders over $49.99 Offer (UPS Ground) are valid ONLY in the United States of America. Orders to Canada have a $10 Shipping and Handling Charge. Prices may change without notice. If you would like Express Shipping please call 1-800-675-3044. X10 reserves the right to discontinue the posted promotional offers at any time. X10 WorldWideWeb pages are copyrighted and may not be reproduced in any form without the expressed written consent of X10. © 1998. For questions or comments regarding X10, listed products, or this Web Site please contact: webmaster@mail.x10.com |
f you set the MS12A to a unique code (Housecode A and Unit
Code 1), then walk into the room where the MS12A is located, a lamp module set to "A1" will turn on. As long as you keep moving, the light will stay on, and 6 minutes after you stop moving the light will turn off.