"NINJA
Pan 'n Tilt Mount takes Wireless Video Surveillance to the next level!"
Incredible
240º x 130º Pan 'n Tilt Range - Now you can easily control remotely what your camera is looking at; Pan 240 degrees left to right (31 seconds per cycle) and tilt 130 degrees up and down! (15 seconds per cycle). Amazingly smooth & fluid movement!
NINJA
ScanPad Remote (Included) - Use the NINJA
Remote to scan between 4 cameras (on/off) and control the position of each camera that is mounted on a NINJA Pan 'n Tilt base. Remote sends RF (Radio Frequency) signals to X10 Transceiver, which passes the signals through your house wiring to control the cameras.
Ultra Sweep
& Scan Feature™ - Put
your NINJA on Auto-Pilot! You
can store up to 4 positions for each camera. Then using the "sweep" button on your NINJA
ScanPad, you can automatically sweep thru the 4 stored positions (ex. front driveway, street, front lawn, and front door area.) Great for
recording and monitoring an entire 240 degree area when you're not home!
Note: This demo does not represent the speed at which the NINJA moves.
The NINJA ScanPad Remote:
Scan between all your cameras using the C1 - C4 buttons. Use the "blue" arrow buttons to pan the selected camera left/right or tilt up/down. Using the P1-P4 buttons set 4 separate locations to monitor. Then by selected the "sweep" button, NINJA will automatically move to each position then repeat.
Click to see enlarged photo
Note: The NINJA Unit itself can pan 180 º and tilt 70º. When you add a camera, you gain an additional 60º of viewable area! Thus, your viewable range is 240º by 130º
SIMPLE
AS 1-2-3! Attach any XCam2 Video Camera to the NINJA Base, then view all the action on any TV or PC*! Then using the NINJA ScanPad Remote control up/down and left/right as you scan all the action!
