The EagleEye Wireless Motion Sensor is small, sleek and very powerful! They supercharge any home and lifestyle by removing the need for switches and buttons. Great for outdoors! Weather Resistant! Now with Simple-to-Use, Adjustable time delay and more enhanced performance features!

• Super Small: Only 2.5" by 2.5"
• No Risk: 30-Day money back guarantee
• Warranty: 12-month limited warranty

The EagleEye Motion Sensor works anytime, day or night, indoors or out! Automatically turn on an area of light, all controlled by X10 modules.

• Fully weather-proof! The EagleEye Motion Sensor is the perfect solution for monitoring indoors and out!
• Simple-to-Use, Adjustable time delay! Set the delay from 1 minute to 255 minutes! Now you can have the flexibility to have your lights, appliances, or even Macros turn off just 60 seconds after you leave the room or turn off the lights! Simply pull the tiny cap off the top of the motion sensor (see above photo), then turn the adjustable switch for how long you want the delay before it turns off! (1 min to 60 minutes max). For example, if you set it at the half way point, when motion is detected, your light would come on then turn off 30 minutes later.
• Easily disable the dawn/dusk feature so it will work 24 hours/day! Sensor is set to detect motion at all times as the default. Then, you can easily enable the dawn/dusk feature so lights only come on when its dark and turn off when there's light.

How it works...
The EagleEye Motion Sensor sends wireless Radio Frequency (RF) signals to an X10 Transceiver or any X10 security system base receiver. The Transceiver receives the signals from the Motion Sensor and passes them onto your house wiring.

These signals are then received by X10 lamp, appliance, or wall switch modules to control lights (or appliances) around the home.

If you set the EagleEye Motion Sensor to a unique code (House Code A and Unit Code 1), then walk into the room where the EagleEye Motion Sensor is located, a lamp module set to "A1" will turn on. As long as you keep moving, the light will stay on, and when you stop moving, the light turns off after the amount of time you select.

The signals transmitted onto your house wiring can also be received by the two-way Computer Interface (CM11A) to initiate macros. The Computer Interface then performs a sequence of events that you've set it up to do.

• Up to 20' ft range
• Passive infrared technology
• Motion Sensor is 2.5 x 2.5 inches
• Requires 2 AAA batteries (not included)

Special Features:

• You can easily disable the dawn/dusk feature so it will work 24 hours/day! No need to cover photo-cell with black tape.
• It has adjustable time delay! You can set the delay from 1 minute to 255 minutes! Now you can have the flexibility to have your lights, appliances, or even Macros turn off just 60 seconds after you leave the room (The old version had only 1 setting of 6 minutes).
• Weather resistant case protects the sensor from the elements.
• Locking screw prevents easy removal of batteries.

About the Lamp Module

Control your lights from across the room or from the other side of the house! Incandescent lights can be dimmed too, even if they don't normally (halogen and fluorescent bulbs cannot dim). Set the best lighting level for any lamp or light in your house. Plug the lamp into the Lamp Module and plug the Lamp Module into any normal wall socket-it's that easy! This device is ideal for controlling nearly any lamp in your entire home.

Return to Main Offer

Step Into the Amazing House That Runs Itself!

NEW ActiveHome! Step up to X10’s NEW ActiveHome! Your motion sensors and controllers can easily work as powerful Macro-Controllers – meaning you can easily program a series of commands to run when you decide! For example, with just the push of one button you can turn on electronics and a series of lights – even dim them to the perfect setting! And that’s just the beginning of what NEW ActiveHome can do for you. NEW ActiveHome is a breakthrough technology that gives you complete control over the lights and appliances in your home. NEW ActiveHome uses your PC and a USB interface, making it easy to control lights and appliances by remote control, timers that you set, macros that you design and more! Don’t just take our word for it -- check out why ActiveHome won PC Magazine’s Editor’s Choice now! Don’t wait – make your home an ActiveHome today! And here's the best part! You can get started TODAY with ActiveHome for ONLY $49.99 - a 50% Savings! Or, pick up the Ultimate 9-Piece Package for only $99.99 and Save $131! What's included $ Make Money with X10

Return to Main Offer

ProPak Includes: List Price 2 EagleEye Motion Sensors $49.98 2 Dimmable Lamp Modules $25.98

Sold Separately: $75.96 You Save: $35.97 (47%) NOW ONLY: $39.99 What's included $ Make Money with X10