Before you connect the Video to USB Converter (model VA10A or VA11A) you must first install the drivers and XRay Vision Software. Download the software using the link in the e-mail you received. If you didn't receive an e-mail with a download link, use our Secure Download Link Request form to have one sent to you.

Next, run the installation application. Select the directory where XRay Vision will be installed and decide how you want XRay Vision listed on your Windows Start menu. After that, the XRay Vision installation program will automatically finish. You are now ready to set up the Video to USB Adapter.

Connecting the USB Video Capture Adapter

When the installation program instructs you to, plug the Video to USB Converter connector into a USB port on your computer. The computer will recognize that new hardware has been installed and complete the installation.

First set the transmission channel on the camera. Remove the rubber cap and use a paper clip to change the setting - A is at the bottom, D at the top. Next, place or mount the XCam2 in the area you desire and connect it to the power supply. The camera is now transmitting.

1. Plug the yellow video plug on the supplied cable into the Video Out jack on the VR30A.

2. Connect the other end of the cable to the yellow Video In jack cable on the Video Capture Adapter.

3. Plug the PR30A power supply into any 120V AC outlet.

4. Plug the power output of the PR30A into the DC 12V plug on the VR30A.

5. Make sure the Channel switch on the underside of the VR30A is set to the same letter as that on the XCam2.

After you have installed the XRay Vision server, you can use the XRay Vision remote viewer look at your images from any PC connected to the Internet. The remote viewer is automatically installed with the server.

You can send the installer applications to family and friends for their use in installing the remote viewer.