Bathroom Home Automation

Hands-Free, On Demand Bathroom Home Automation

No more touching the light switch right after you washed you hands, no more tripping in the dark on that late night trip to the bathroom or fumbling around for the light switch early in the morning.

With Bathroom Home Automation, the bathroom light comes on by itself the instant you open the bathroom door. And after you leave, it will turn off automatically. You'll never need to touch the bathroom light switch again!

And in case you were wondering if you need any special equipment or light fixtures to make this work, the answer is no. All you need is this simple Bathroom Home Automation motion-activated lighting kit and your existing bathroom light.

Since this is a wireless system, you won't need to call any contractors or electricians. And we know that not everyone is handy, so we've made this kit easier than ever to set up! Mount the Motion Sensor ($24.99 value) in the bathroom, screw the Socket Lamp Module ($19.99 value) into the bathroom light fixture and screw in the bulb. Finally, plug in the Wireless Transceiver ($12.99 value) into a power outlet and you're done. It won't take you more than five minutes!

As an added bonus, the Transceiver also doubles as a lamp/appliance module. That means you can set the bathroom radio, plug-in medicine cabinet light or any other lamp or appliance to come on as well when you enter the bathroom. It will also turn off when you leave the bathroom.

Not only is it convenient to have motion-activated Bathroom Home Automation, but you save energy, lower your electric bill and make your home a little more sanitary by never touching that light switch with freshly washed hands again!

Order today and get the complete Bathroom Home Automation Kit for just $19.99!

• Motion triggers bathroom light to come on, no motion makes light turn off
• Adjust time for bathroom light to turn off from 1-256 minutes after you leave the room
• Socket Lamp Module works with any standard light fixture
• Everything included for a complete Bathroom Home Automation system
• No wires, no contractors and no electricians - set it up in less than 5 minutes with no tools

Mount the Wireless Motion Sensor anywhere that is convenient.

Plug the Wireless Transceiver into the wall.

Screw the Wireless Lamp Module into the light you wish to control and screw the bulb into the Module.

Set all the house codes to the same Letter, and assign the module a unique Unit Code. Make sure the codes match on your devices, and you're done!