The amazing FloodCam is a weather-resistant wireless COLOR video camera with built-in 2.4GHz transmitter and motion sensor and attached dual floodlight casing. The FloodCam is activated by the integrated motion sensor so that when someone approaches your home, the floodlights (bulbs not included) come on, turning night into day and the camera catches the startled intruder on video! The camera transmits its picture via a built-in 2.4 GHz transmitter, to a Video Receiver (included with Complete Kit) which you connect to a TV anywhere in your home. The FloodCam sends the wireless signals even through walls, up to 100 feet so you can watch and record all the action! The SECRET behind the FloodCam is the "smart" Built-In Wireless Motion Sensor (see photo on right). The video camera always turns on when motion is detected and the floodlights always turn on when it is dark and motion is detected. (An X10 Transceiver is NOT necessary for this but required for multi-camera applications.) In a multi-camera setup, the motion sensor sends wireless Radio Frequency (RF) signals to an X10 Transceiver (or VCR Commander II.) The Transceiver receives the signals from the Motion Sensor and passes them onto your house wiring. These signals send the information back out to turn off the other cameras or to sound a chime, illuminate hallway lights, etc. "Integration & EASE OF USE are WHY X10 customers LOVE the FloodCam!" This is a very simple system to install - just a few connections and you're up and running (assuming you will use the FloodCam to replace an existing outdoor light fixture). If there's not an existing fixture, you will need to install a wall box and run conduit to it. If you need help installing a wall box and running conduit please contact a local X10 professional installer. Camera uses "Instant-ON" technology. No warm-up time when turning on or switching between cameras. You get instant LIVE crisp video! (X10's top of the line camera technology) Easily integrates into your multi-camera system. Acts just like an XCam2 Camera! Weather-resistant casing. Great for outdoors. (Operating Temp.: 32 to 131F) Field of View: 60 degrees Resolution: 310 TV Lines Auto Shutter: 1/60 to 1/15,000 sec. Note: Your TV can only view 30 frames per second. Min. Illumination: 3 LUX (f1.9) Motion Sensor Range: 20 feet. Max wattage: 150W per lamp holder.  Requires 120VAC Control Panel: Click for Enlarged Photo YOU CONTROL EVERYTHING: Underneath the FloodCam unit (shown at left) is a hidden control panel that allows you to easily configure all the settings. Set the Channel to the same channel as your Video Receiver. The FLOODLIGHT CONTROL function allows you to detect motion at all times (LIGHT) or only when it gets dark (DARK). Using the TIME DELAY dial, you can adjust how long the camera waits to turn off after motion has stopped. The CAMERA MODE switch lets you set how the camera responds to motion and X10 controllers. Using the two dials at the bottom, set the camera's unit code and house code (example A-4). Keep your cameras in groups of four for better scanning control. To download the Manual, Click Here! (.pdf)

  

About the ScanPad Remote Remotely control any combination of up to 16 lights, appliances and X10 Cameras from across the room or the other side of the house. Has dim and brighten control for any lights connected through an X10 Lamp module or Wall Switch. Dim your lights and set the perfect lighting level for any room, even if your lights didn't dim before. The ScanPad Remote works in conjunction with X10 Transceiver Modules.

 

About the Transceiver The powerful Transceiver Module is the relay for any wireless X10 system. It allows you to remotely control any household appliance or light that is plugged into an Appliance Module, Lamp Module, Wall Switch Module or any of our many other lighting and appliances products. It’s also the relay when switching between camera views in a multi-camera system. Simply plug the Transceiver into any normal wall socket and, using an X10 remote, control your lamps, appliances and cameras from across the room — or the other side of the house. Even remotely control a light or appliance that's plugged directly into the Transceiver!

 
 

<

Save Even More With a Multi-Camera System!

		Motion Activated Camera & Dual Floodlight! Save 38% on 3 FloodCam Color 3-Camera System Save $123 and Get FREE FedEx Shipping! Instantly and automatically shine powerful floodlights on any intruder—humans and animals alike—whenever motion is detected! The weather resistant 3 FloodCam System with Remote Control Kit (VT38A) combines the best of X10 surveillance and motion-activation technology in one ultra-powerful solution. Motion-activated floodlights & wireless color video camera! InstantON technology requires no warm-up time Instant LIVE video feed to your TV or VCR or PC What's included $ Make Money with X10 Live Chat
		Everything you need is included: List Price FloodCam Color Video Cameras (3) (VT38A) $239.97 Video Receiver $39.99 Camera Remote Controller $29.99 Wireless Transceiver $12.99 FREE FedEx Shipping FREE! Sold Separately: $322.94 NOW ONLY: $199.99 You Save: $122.95 (38%) What's included $ Make Money with X10