[an error occurred while processing this directive]  

The amazing FloodCam is a weather-resistant wireless COLOR video camera with built-in 2.4GHz transmitter and motion sensor and attached dual floodlight casing. The FloodCam is activated by the integrated motion sensor so that when someone approaches your home, the floodlights (bulbs not included) come on, turning night into day and the camera catches the startled intruder on video! The camera transmits its picture via a built-in 2.4 GHz transmitter, to a Video Receiver (included with Complete Kit) which you connect to a TV anywhere in your home. The FloodCam sends the wireless signals even through walls, up to 100 feet so you can watch and record all the action! The SECRET behind the FloodCam is the "smart" Built-In Wireless Motion Sensor (see photo on right). The video camera always turns on when motion is detected and the floodlights always turn on when it is dark and motion is detected. (An X10 Transceiver is NOT necessary for this but required for multi-camera applications.) In a multi-camera setup, the motion sensor sends wireless Radio Frequency (RF) signals to an X10 Transceiver (or VCR Commander II.) The Transceiver receives the signals from the Motion Sensor and passes them onto your house wiring. These signals send the information back out to turn off the other cameras or to sound a chime, illuminate hallway lights, etc. "Integration & EASE OF USE are WHY X10 customers LOVE the FloodCam!" This is a very simple system to install - just a few connections and you're up and running (assuming you will use the FloodCam to replace an existing outdoor light fixture). If there's not an existing fixture, you will need to install a wall box and run conduit to it. If you need help installing a wall box and running conduit please contact a local X10 professional installer. Camera uses "Instant-ON" technology. No warm-up time when turning on or switching between cameras. You get instant LIVE crisp video! (X10's top of the line camera technology) Easily integrates into your multi-camera system. Acts just like an XCam2 Camera! Weather-resistant casing. Great for outdoors. (Operating Temp.: 32 to 131F) Field of View: 60 degrees Resolution: 310 TV Lines Auto Shutter: 1/60 to 1/15,000 sec. Note: Your TV can only view 30 frames per second. Min. Illumination: 3 LUX (f1.9) Motion Sensor Range: 20 feet. Max wattage: 150W per lamp holder.  Requires 120VAC Control Panel: Click for Enlarged Photo YOU CONTROL EVERYTHING: Underneath the FloodCam unit (shown at left) is a hidden control panel that allows you to easily configure all the settings. Set the Channel to the same channel as your Video Receiver. The FLOODLIGHT CONTROL function allows you to detect motion at all times (LIGHT) or only when it gets dark (DARK). Using the TIME DELAY dial, you can adjust how long the camera waits to turn off after motion has stopped. The CAMERA MODE switch lets you set how the camera responds to motion and X10 controllers. Using the two dials at the bottom, set the camera's unit code and house code (example A-4). Keep your cameras in groups of four for better scanning control. To download the Manual, Click Here! (.pdf)

 

About the Video Receiver A Video Receiver is a necessary component of X10’s Wireless Camera Systems. With a Video Receiver, you can receive video signals from up to 16 wireless cameras and display them (one at a time) on your TV screen. Alternatively, you can connect a Video Receiver to a VCR to record the video signals or to a PC for computer- or web-based surveillance (USB Video Capture Adapter and Software required).

  

About the Capture Adapter The Capture Adapter works with X10 video software, allowing you to operate X10 cameras and display video using your PC. It features an RCA video jack on one end and a USB jack on the other. The Capture Adapter plugs into an available USB port on your computer, and connects to an X10 Video Receiver with the RCA jack. Once it’s connected, and your X10 software is installed, you’re ready to start viewing your cameras on your PC!

 

About the PC Transceiver The USB Plug ‘n Play PC Transceiver sends and receives Wireless Radio Frequency (RF) signals and works with the MultiView or XRay Vision software (sold separately). The PC Transceiver also works with X10 Entertainment Software, Firecracker Software and can even dim lights that couldn’t dim before! The PC Transceiver can automatically turn on lights, appliances, and cameras through a Wireless Transceiver when X10 motion detectors are tripped.

 

About XRay Vision Transmit LIVE video to your PC and send digital snapshots to any remote PC via the Internet with XRay Vision Software. It's the ultimate way to view everything that's happening at your home or office remotely! The secret is an incredibly powerful software interface. It uses the included USB adapter to capture and manage images from any X10 Video Camera and makes them available to you remotely – either through an imagebase or via e-mail. It's a complete kit!

 
 

Save When You Buy a Multi-Camera System!

		See & Record Everything Wirelessly! Save 41% on FloodCam Wireless Color 3-Camera System with XRay Vision Software Order Today, Save $182.93 Enjoy the proven benefits of this tiny, discreet video camera without the prohibitive cost. The vivid FloodCam Wireless Color 3-Camera System with XRay Vision Camera Monitoring Software installs with ease and features: Instant LIVE video feed to your TV or VCR or PC 100 foot range through walls and floors 30-Day Risk-Free Money Back Guarantee! What's included $ Make Money with X10 Live Chat
		Everything you need is included: List Price FloodCam Color Video Cameras (3) $239.97 Video Receiver $39.99 Camera Remote Controller $29.99 Wireless Transceiver $12.99 USB Video Capture Adapter $69.99 USB PC Transceiver $49.99 XRay Vision Software (download) included FREE FedEx Shipping FREE! Sold Separately: $442.92 NOW ONLY: $259.99 You Save: $182.93 (41%) What's included $ Make Money with X10