The amazing FloodCam is a weather-resistant wireless COLOR video camera with built-in 2.4GHz transmitter and motion sensor and attached dual floodlight casing. The FloodCam is activated by the integrated motion sensor so that when someone approaches your home, the floodlights (bulbs not included) come on, turning night into day and the camera catches the startled intruder on video! The camera transmits its picture via a built-in 2.4 GHz transmitter, to a Video Receiver (included with Complete Kit) which you connect to a TV anywhere in your home. The FloodCam sends the wireless signals even through walls, up to 100 feet so you can watch and record all the action! The SECRET behind the FloodCam is the "smart" Built-In Wireless Motion Sensor (see photo on right). The video camera always turns on when motion is detected and the floodlights always turn on when it is dark and motion is detected. (An X10 Transceiver is NOT necessary for this but required for multi-camera applications.) In a multi-camera setup, the motion sensor sends wireless Radio Frequency (RF) signals to an X10 Transceiver (or VCR Commander II.) The Transceiver receives the signals from the Motion Sensor and passes them onto your house wiring. These signals send the information back out to turn off the other cameras or to sound a chime, illuminate hallway lights, etc. "Integration & EASE OF USE are WHY X10 customers LOVE the FloodCam!" This is a very simple system to install - just a few connections and you're up and running (assuming you will use the FloodCam to replace an existing outdoor light fixture). If there's not an existing fixture, you will need to install a wall box and run conduit to it. If you need help installing a wall box and running conduit please contact a local X10 professional installer. Camera uses "Instant-ON" technology. No warm-up time when turning on or switching between cameras. You get instant LIVE crisp video! (X10's top of the line camera technology) Easily integrates into your multi-camera system. Acts just like an XCam2 Camera! Weather-resistant casing. Great for outdoors. (Operating Temp.: 32 to 131F) Field of View: 60 degrees Resolution: 310 TV Lines Auto Shutter: 1/60 to 1/15,000 sec. Note: Your TV can only view 30 frames per second. Min. Illumination: 3 LUX (f1.9) Motion Sensor Range: 20 feet. Max wattage: 150W per lamp holder.  Requires 120VAC Control Panel: Click for Enlarged Photo YOU CONTROL EVERYTHING: Underneath the FloodCam unit (shown at left) is a hidden control panel that allows you to easily configure all the settings. Set the Channel to the same channel as your Video Receiver. The FLOODLIGHT CONTROL function allows you to detect motion at all times (LIGHT) or only when it gets dark (DARK). Using the TIME DELAY dial, you can adjust how long the camera waits to turn off after motion has stopped. The CAMERA MODE switch lets you set how the camera responds to motion and X10 controllers. Using the two dials at the bottom, set the camera's unit code and house code (example A-4). Keep your cameras in groups of four for better scanning control. To download the Manual, Click Here! (.pdf)

Use Your Computer For Surveillance

The amazing XCam2 with XRay Vision software enables you to transmit LIVE COLOR video to your PC and send digital snapshots to any remote PC via the Internet! It's the ultimate way to view everything that's happening at your home/office remotely! The secret to this earth-shattering technology is an incredibly powerful software interface. It uses the included sleek USB converter to capture and manage images from any X10 Wireless Video Camera, and make them available to you remotely -- either through an Imagebase or via e-mail! It's a complete kit! The way you view images is entirely customizable. You can set the software (locally or remotely) to update you with new images every 10 seconds or every 2 hours. You can even have it take a snapshot only if it detects motion! You use the remote viewer on your work PC (free download) or if you're away on vacation, you can have XRay Vision update a web site with new images or email the images to you!

About the Video Receiver A Video Receiver is a necessary component of X10’s Wireless Camera Systems. With a Video Receiver, you can receive video signals from up to 16 wireless cameras and display them (one at a time) on your TV screen. Alternatively, you can connect a Video Receiver to a VCR to record the video signals or to a PC for computer- or web-based surveillance (USB Video Capture Adapter and Software required).

About XRay Vision Transmit LIVE video to your PC and send digital snapshots to any remote PC via the Internet with XRay Vision Software. It's the ultimate way to view everything that's happening at your home or office remotely! The secret is an incredibly powerful software interface. It uses the included USB adapter to capture and manage images from any X10 Video Camera and makes them available to you remotely – either through an imagebase or via e-mail. It's a complete kit!

About the MultiView Software Turn your PC into the ultimate surveillance center for your home or business! With X10's MultiView Software you can view up to four X10 Cameras from one screen and "zoom" any camera for LIVE Video. With MultiView, you can control all the surveillance features including how often to refresh images and Motion Detector ultilization.

About the WebView Software Turn your PC into the ultimate surveillance center for your home or business! With X10's WebView Software you can monitor up to four Wireless XCam2 Cameras from almost any computer* connected to the Internet. To remotely view your cameras’ images, simply access multiview.x10.com, enter your registration code and password, and you are able to view the latest images from all of your cameras remotely. Images can be updated as fast as every four seconds – it’s your choice. From this secure connection, you’ll be able to view a comprehensive history of time-stamped images taken from your cameras — even review images taken days ago — from virtually anywhere in the world! * Must have MultiView software installed.

About the ScanPad Remote Remotely control any combination of up to 16 lights, appliances and X10 Cameras from across the room or the other side of the house. Has dim and brighten control for any lights connected through an X10 Lamp module or Wall Switch. Dim your lights and set the perfect lighting level for any room, even if your lights didn't dim before. The ScanPad Remote works in conjunction with X10 Transceiver Modules.

About the Transceiver The powerful Transceiver Module is the relay for any wireless X10 system. It allows you to remotely control any household appliance or light that is plugged into an Appliance Module, Lamp Module, Wall Switch Module or any of our many other lighting and appliances products. It’s also the relay when switching between camera views in a multi-camera system. Simply plug the Transceiver into any normal wall socket and, using an X10 remote, control your lamps, appliances and cameras from across the room — or the other side of the house. Even remotely control a light or appliance that's plugged directly into the Transceiver!

About the Capture Adapter The Capture Adapter works with X10 video software, allowing you to operate X10 cameras and display video using your PC. It features an RCA video jack on one end and a USB jack on the other. The Capture Adapter plugs into an available USB port on your computer, and connects to an X10 Video Receiver with the RCA jack. Once it’s connected, and your X10 software is installed, you’re ready to start viewing your cameras on your PC!

About the PC Transceiver The USB Plug ‘n Play PC Transceiver sends and receives Wireless Radio Frequency (RF) signals and works with the MultiView or XRay Vision software (sold separately). The PC Transceiver also works with X10 Entertainment Software, Firecracker Software and can even dim lights that couldn’t dim before! The PC Transceiver can automatically turn on lights, appliances, and cameras through a Wireless Transceiver when X10 motion detectors are tripped.

		Triple Motion Activated Cameras & Dual Floodlights with PC/Web Kit Save 47% on 3-FloodCam Wireless Color Camera System with Monitoring Software  Order Today, Save $293 and Get FREE FedEx Shipping! Instantly and automatically shine powerful floodlights on any intruder—humans and animals alike—whenever motion is detected! The weather resistant 3-FloodCam Wireless Color Camera System with PC/Web Software Kit (VT38A) combines the best of X10 surveillance and motion-activation technology in one ultra-powerful solution. The XRay Vision Camera Monitoring Software makes it easy to remotely monitor your home, driveway, store & more, directly from your PC or from anywhere in the world over the Internet. You can even switch camera feeds with the included remote just like changing channels on your TV! 3X motion-activated floodlights & wireless color video camera! InstantON technology requires no warm-up time New images emailed or updated to Internet! What's included $ Make Money with X10 Live Chat
		Everything you need is included: List Price FloodCam Color Video Cameras (3) (VT38A) $239.97 Video Receiver $39.99 Camera Remote Controller $29.99 Wireless Transceiver $12.99 USB Video Capture Adapter $69.99 USB PC Transceiver $49.99 XRay Vision Software (download) included MultiView Software (download) $99.99 WebView Software (download) $79.99 FREE FedEx Shipping FREE! Sold Separately: $622.90 NOW ONLY: $329.99 You Save: $292.91 (47%) What's included $ Make Money with X10