Turn 100 feet into 100 miles and more. Now, instead of seeing LIVE video from your Vanguard camera network at up to 100 feet away, you can watch the action from anywhere in the world! Just like being there, you'll see full-motion video from your home or business anytime you want.

Vanguard Internet Control Center Software (SW26A) works great with any connection speed - T1, Cable, DSL. The video is optimized for LIVE broadcast over the internet so, you'll never get a "rebuffering" delay! You can even adjust picture quality and frame rate for the best experience. And, as you would expect, access to your video is completely secure.

Finally, your high-speed internet connection is about to really pay off!

The next best thing to seeing LIVE video is being able to take complete control of your Vanguard camera and explore the entire area you are monitoring.

Moving your Vanguard camera to a preset position is easy with the Preset Control Bar. All of your positions are represented with a thumbnail image. One click on the image of your choice sets Vanguard into action. Watch as it pans, tilts and zooms to the next location. Plus, setting new preset is now as easy a clicking in any open slot.

When you want to explore at will, the Pan, Tilt and Zoom buttons are readily available to give you precise control of your location. You'll also find slider controls to adjust picture quality and frame rate along with other manual camera controls like iris and focus.

This is a whole new way to control Vanguard. You can Pan and Tilt Vanguard by simply clicking your new location directly on the video. Then, when you want to move and zoom at the same time, just click and drag to highlight the area you want Vanguard to zoom in on. It Doesn't Get Any Easier Than This!

With Vanguard Internet Control Center Software (SW26A), you can easily switch between as many as eight cameras and see multiple views all at the same time. The active video window shows LIVE video while all others display a snapshot of the most recent image at that location.

Change your active window with just one click!

Or, set an amount of time to scan between your cameras and then sit back and watch as everything works on autopilot.

Need an extra set of eyes? Just add one of X10's motion detectors. When you do, you'll instantly open up a whole host of automated events that can be triggered. Anytime motion is detected, you can do all of the following:

Activate a specific Vanguard camera

Send an instant e-mail notification to yourself

Start recording live video or still images

Turn on a light or other X10 device

Send the video recording or image stills by FTP after motion stops

The software makes adding motion detectors to your Vanguard network a breeze. Simply click on the Motion tab and you'll see each type of detector you can add along with those that are already part of your network.

Check out our most popular motion sensors here:
EagleEye $24.99 | ActiveEye $29.99

The tape has been replaced. Given the massive size, speed and low cost of today's PC hard drives, it's no wonder everyone is moving towards digital recording. Of course, when you compare the benefits of digital recording vs tape it's even more obvious.

Save time reviewing video being able to instantly access any point in time

Reduce costs of replacing old tapes or servicing video recorders

See and easily print crystal clear still images

Get virtually unlimited recording time based on hard drive size

Preserve images forever as quality does not degrade over time

And the list goes on. Vanguard Internet Control Center Software gives you total control of how you record from your Vanguard camera network. Pick the video image size, quality and frame rate that fits your needs. Automatically capture snapshots at intervals from 5 seconds up to 1 hour and set how often you scan between the cameras in your network. You can even start recording of live video or take snapshots manually while at your host PC or while viewing over the internet.

Everything you capture includes a precise time and date stamp. And, when you add one of X10's motion detectors to your network, you'll even see exactly when the motion occurred.

Now, seeing what happened while you were gone is easier than ever! The History view lays out all the action in an easy to read timeline. You'll see thumbnails of all your snapshots, indicators of live video as well as all the motion alarm events.

And, just like Vanguard camera, you can select an area and Zoom in for precise detail. We've even added a powerful filter so you can get precisely what you want. For example, view all snapshots of motion events from Vanguard camera #2.