FireCracker Computer Interface
No bigger than a Fig Newton, the interface plugs into a serial port in the back of your computer. Our through-port design allows you to plug another device into the back of the interface -- you need not lose a serial port to use FireCracker!

Using the FireCracker software allows you to send commands through this interface to the Transceiver Module and through the household wiring. Customize your home appliances to fit your own lifestyle. For our suggestions about how to use FireCracker, click here.

This interface can control up to 256 sets of lights and appliances.

FireCracker Software>
Using the software, you send commands to the computer interface that you've plugged into the back of your computer (see above). The interface sends commands to the transceiver module, which translates the wireless signal into an X10 signal.

Best of all, the FireCracker kit is fully compatible with your voice-activation software -- simply tell the coffeepot to start brewing and it will!

View Screenshots

 Free FireCracker Software

About the PalmPad Remote

The PalmPad Remote let you remotely control up to 16 X10-enabled lights and appliances. Control your lights that are connected through X10 Lamp Modules or Wall Switches. You can even dim your incandescent lights and set the proper lighting level for any room, even if your lights didn't dim before. Palm Pad Remote works in conjunction with X10 transceiver modules.

About the Lamp Module

Control your lights from across the room or from the other side of the house! Incandescent lights can be dimmed too, even if they don't normally (halogen and fluorescent bulbs cannot dim). Set the best lighting level for any lamp or light in your house. Plug the lamp into the Lamp Module and plug the Lamp Module into any normal wall socket-it's that easy! This device is ideal for controlling nearly any lamp in your entire home.

About the Transceiver

The powerful Transceiver Module is the backbone for any Home Automation setup. It allows you to remotely control any household appliance or light that is plugged into an Appliance, Lamp Module, Wall Switch Module or any of our many other lighting and appliances products. Simply plug the Transceiver into any normal wall socket, and using the remote, you have control of your lamps and appliances from across the room - or the other side of the house.