Ways to Use

• Instantly shine powerful floodlights on any intruder and instantly capture all the action on video tape (or with your PC*)! The FloodCam combines the best of X10 surveillance and motion-activation technology in one ultra-powerful solution!
  
  
• When used in a multi-camera setup, (requiring an X10 Transceiver) the motion sensor sends wireless Radio Frequency (RF) signals to an X10 Transceiver (or VCR Commander II.) The Transceiver receives the signals from the Motion Sensor and passes them onto your house wiring. These signals send the information back out to turn off the other cameras or to sound a chime, illuminate hallway lights, etc.
  
  
• You Control Everything: Underneath the FloodCam unit is a hidden control panel that allows you to easily configure all the settings:
  
  
• Set the Channel to the same channel on your Video Receiver.
  
  
• The FLOODLIGHT CONTROL function allows you to detect motion at all times (LIGHT) or only when it gets dark (DARK).
  
  
• Using the TIME DELAY dial you can adjust how long the camera waits to turn off after motion has stopped.
  
  
• CAMERA MODE switch lets you set how the camera responds to motion and X10 controllers. Using the 2 dials at the bottom, set the camera's unit code and house code.
  
  
• Keep your cameras in groups of 4 for better scanning control.
  
  
• Need more ideas? Visit the X10-Zone for dozens of unique ideas, straight from our customers!